Model: KINGCAT
Material: Plastic
Torch size(mm): 95(L)x35(HD)x28(TD)
Tail light size(mm): 65(L)x40(W)x25(H)
Weight(g): 115/140
Packing size(mm): 158(L)x148(W)x35(H)
SAFEGUARD ALL-PURPOSE BIKE WARNING LIGHT
Instruction:
1. Open the headlight by turning anti-clockwise at the front part, place the battery 4xAAA (LR-03) in correct polarity.
2. Install the bracket and mount the headlight onto the bracket by sliding it toward the rear until it clicks into position.
3. To remove the headlight, while pressing the unlock button at the rear of the bracket, pull the headlight for ward.
Installation
1. Install the bracket on your bike's seat rods. Two size of rubbers are provided to fit different diameter or the seat rods.
2. Slide the light assembly into the socket of the bracket until you hear a click. To remove the l ight assembly, push back the clip under the socket and take the light out.
Replace Battery
Use a coin to open the cover on the assembly. Remove the silver plate and replace the batteries (2AAA)
交货期︰ according to the order quantity
